There are high chances that you use a Dyson Vacuum Cleaner for cleaning your carpets at home. However, there is a possibility that you are not aware of the correct way to clean it.
All Dyson vacuum cleaners come with comprehensive instructions as to how to use and maintain their cleaners. This guide is a generic summary. However, always follow the manufacturer’s instructions if they differ from this generic guide.
You need to learn how to clean a Dyson Vacuum Cleaner at home. You can easily learn how to clean a Dyson Vacuum Cleaner by just following these simple steps.
Firstly, you need to gather all the materials required for cleaning a Dyson Vacuum Cleaner and then you need to select an appropriate area in which you can clean it and collect the dust to dispose of. This will make your vacuum run longer and work more efficiently at helping keep your home clean and tidy.
Table of Contents
Materials Required
You will have to collect all the following required tools and materials:
- Flathead Screwdriver.
- Air Blower/Compressor.
- Scissors or Knife.
- Dish Soap.
- Paper Towel.
- Water.
The procedure of Cleaning a Dyson Vacuum Cleaner
Follow the given steps to clean a Dyson Vacuum Cleaner at home:
1. Empty Your Canister
Remove the canister by pressing the button at the top of the canister which is always labeled clearly. Empty Your Canister of any debris into an appropriate bag or container for disposal.
2. Remove the Foam Filter
Open the top flap and take out/remove the Foam Filter and set aside for later.
3. Removal of Canister
Removal of the canister will normally expose the engine’s circumference where dust may have gathered Then use Air Compressor/Blower to blow out all the dirt and dust, if any.
4. Clean Cyclone Part
Put the Cyclone Part over the trashcan and blow out all the dirt and dust usingAir Compressor/Blower. Be careful this part is super messy. Turn over the Cyclone Part and blow air inside as well.
5. Clean the Canister
Use the Air Compressor/Blower to blow out all the dirt and to clean the canister section.
6. Clean the Foam Filter With Cold Water Only
Rinse the Foam Filter under running water and squeeze it until clear water comes out. The filter frame usually has the washing instructions written on the side. It especially says not to put a damp filter back in the vacuum cleaner, but to dry it for 12 hours.
7. Blow Clean/Wash Canister
If there are not instructions with your machine blow clean the canister. If there are instructions to remove the canister, thoroughly run water through the canister. Then wash by rinsing thoroughly with water.
8. Wipe the top of the Cyclone Under the Filter if Dirty
Use a slightly wet, paper towel to wipe off the top of the Cyclone area under the filter. Dry the area thoroughly before putting the filter back after it has dried.
9. Dry the Vacuum Thoroughly
Make sure that all the components of vacuum that encounter water should be completely dry. The filter should not be put back in the machine before the twelve hours of drying has occurred.
When to Clean a Dyson Vacuum Cleaner
You need to clean your Dyson Vacuum Cleaner twice a month apart from emptying regularly. This will help your vacuum run longer.
When to Deep Clean or Service Your Dyson Vacuum Cleaner
The Dyson machine need to be maintained by cleaning and servicing regularly. When and how to do it depends on your model and what you are using it for. If you cannot find your manual and user guides for instructions, you can find the information by clicking here.
How to Clean Your Dyson Vacuum Cleaner’s Filter
1. Unplug your Machine
Turn off and disconnect your vacuum cleaner from the wall socket.
2. Removal of Filters
Now remove the Dyson Filter from the Dyson Vacuum Cleaner.
3. Wash Filters
Wash Filters under cold water only by rinsing under the water supply. Continue by gently squeezing the water out of the Filter. Repeat until clear water comes out. The instructions are usually on the cassette holding the filter.
4. Dry the Filters
Dry the Filters by leaving them in a warm place until they are completely dry. The recommended time for drying is twelve hours.
5. Attach the Filters
Attach the Filters in the Dyson Vacuum Cleaner.
Frequently Asked Questions (FAQs)
Conclusion
In this article I have explained to you that how and when you can clean a Dyson Vacuum Cleaner. Also, I have told you how you can clean a Dyson Filter.
Also, I have given you answers of some of the frequently asked questions such as when to clean a Dyson Filter, Do Dyson Filter need to be replaced, Which things you cannot vacuum with a Dyson, how long does a Dyson Vacuum Cleaner last.
Author Bio:
M Ehtesham Shafiq is a passionate content writer and researcher. He loves to write on different niches to explore and research new niches with authentic information.